John Deere RB22 Series
Rear Blades
- Manually adjustable angle
- Reversible cutting edge for longer life
- Optional end plates hold extra material
- Optional skid shoes increase cutting edge life
Features
Tubular steel frame
The tough, tubular steel frame on Frontier™ RB Series Rear Blades is perfect for grading. Its full-radius moldboard more than handles landscaping needs.
NOTE: This applies to all RB Series Frame except the RBL Series.
Hitch on RB22 Series Rear Blade
Frontier™ RB22 Series Rear Blades are Quik-Coupler compatible with Category 2 hitches, allowing a quick, efficient hookup.
Adjustable turntable for 360-degree turning radius
The turntable on the Frontier™ RB22, RB23, and RB24 Series Rear Blades allows a complete 360-degree turning radius for leveling perfection.
Manually adjusting the offset, angle, and tilt allows the blade to adapt to a variety of conditions and provides added protection and leveling perfection.
Frontier™ rear blade cutting edge
All Frontier RB Series Rear Blade cutting edges are reversible, featuring bevels on both edges to give the blade twice the work life.
End plate option on RB24 Rear Blade
End plate option on RB24 Rear Blade
End plates on RB23 Rear Blade
End plates allow Frontier™ RB Series Rear Blades to hold more material while dragging it from place to place. This is ideal for leveling uneven terrain.
Each of the field conversion kits are for a pair of end plates and prevent the blades from windrowing material when backfilling or leveling.
Make adjustments without leaving the tractor seat
With the optional hydraulic offset, adjustments can be made on the RB22 Series Rear Blades without leaving the tractor seat.
Figure 1 Shown on RB24 Series
Skid shoes increase the life of the cutting edge on all RB Series Rear Blades and avoid damaging the work surface while cleaning corrals or plowing snow.
NOTE: Skid shoe style shown in image above used with RB2060, RB2072, and RB2084 models.
The skid shoe kits include one pair and allow the blade to ride on the shoes at a set height to allow the operator control of the blade depth.
The bundles listed below identify the rear blades they fit.
Hydraulic cylinder on RB23 Rear Blade
The field-conversion hydraulic cylinder kit includes one cylinder. This kit allows the operator to position the blade without having to get off of the operator's station.
NOTE: A rear selective control valve (SCV) is required.
Specs & Compare
Dimensions | RB22 Series Current Model |
| Width in working position | 2.4 m 8 ft |
| Moldboard length | 243.8 cm 96 in. |
| Moldboard height | 48.3 cm 19 in. |
| Moldboard thickness | 0.6 cm 0.25 in. |
Weight | |
| Machine | 350.2 kg 772 lb |
| Shipping per unit | 376 kg 829 lb |
Tractor requirements | |
| PTO hp (kW) | Maximum (2WD) 59.7 kW 80 hp Maximum (4WD) 52.2 kW 70 hp |
| Hydraulic offset kit (hoses and fittings included) | Optional hydraulic offset - up to one hydraulic remotes required |
Angle, tilt, offset, pivot | |
| Pivot angle degrees | 360 degree (angle) |
| Angle forward, number of positions | Three positions, on each side up to 45 degree (angle) |
| Angle reverse, number of positions | Three positions, on each side up to 45 degree (angle) |
| Tilt positions/degrees | Three positions, up or down up to 23 degree (angle) |
| Offset position left or right | 22.9 or 45.7 cm 9 or 18 in. |
Hitch | |
| Type | Cat. 2 |
| Quick hitch compatibility | ASAE Cat. 2 Quick coupler compatible |
Reversible cutting edge | |
| Thickness | 1.3 cm 0.5 in. |
| Height | 15.2 cm 6 in. |
Duty | |
Parking stand | |
Set-up time | |
Warranty | |
Additional information | |