John Deere

Welcome to Ag-Power | Premier John Deere Equipment and STIHL Dealership.

512 Disk Ripper

The 512 Disk Ripper is an ideal primary tillage tool for low-, medium-, and high-level residue crops.

Features and Benefits

  • Crank-adjust single-point depth control
  • Typical percents of residue cover remaining
  • Walk-Over™ tandem wheels provide added support and stability
  • Level-lift™ hitch/turnbuckle holds the frame level
  • Ripper standards are located between the disk gangs
  • Disk gangs use field-proven gang components from the 637 and650 Disks
  • Discontinued - 512 rear hitch
  • Category 5 hitch link

SPECS

  • MANUFACTURER John Deere
  • MODEL 512

Tool

  • Configuration Disk - Ripper - Disk
  • Option 1 5-standard on 30-in. spacing
  • Option 2 7-standard on 30-in. spacing
  • Option 3 7-standard on 30-in. spacing (low transport)
  • Option 4 9-standard on 30-in. spacing
  • Option 5 ---
  • Option 6 ---
  • Option 7 ---
  • Option 8 ---
  • Option 9 ---
  • Option 10 ---
  • Option 11 ---
  • Option 12 ---
  • Option 13 ---
  • Option 14 ---
  • Option 15 ---
  • Option 16 ---
  • Option 17 ---

Working Width

  • Option 1 12-ft. 6-in.
  • Option 2 17-ft. 6-in.
  • Option 3 17-ft. 6-in.
  • Option 4 22-ft. 6-in.
  • Option 5 ---
  • Option 6 ---
  • Option 7 ---
  • Option 8 ---
  • Option 9 ---
  • Option 10 ---
  • Option 11 ---
  • Option 12 ---
  • Option 13 ---
  • Option 14 ---
  • Option 15 ---
  • Option 16 ---
  • Option 17 ---

Transport Width

  • Option 1 15-ft. 6-in.
  • Option 2 20-ft. 8-in.
  • Option 3 18-ft.
  • Option 4 18-ft.
  • Option 5 ---
  • Option 6 ---
  • Option 7 ---
  • Option 8 ---
  • Option 9 ---
  • Option 10 ---
  • Option 11 ---
  • Option 12 ---
  • Option 13 ---
  • Option 14 ---
  • Option 15 ---
  • Option 16 ---
  • Option 17 ---

Depth

  • Maximum operating depth, in. 16

Transport Clearance

  • Standard, in. 9

Underframe Clearance

  • Maximum, in. 37.5

Speed

  • Operating speed 5-6

Horsepower

  • Horsepower required per standard 37-55

Depth Control

  • Option 1 Single point crank
  • Option 2 Electro-hydraulic TouchSet

Hydraulics

  • Option 1 1 SCV (lift) at 2500 psi for optimum raise times
  • Option 2 2 SCVs (lift and low transport) at 2500 psi for optimum raise times

Hitch

  • Design Single tube
  • Fore-aft adjustment Hitch turnbuckle

Standards

  • Spacing, in. 30
  • Frame cross section ---

Standards, Option 1

  • Trip force, lb. Cushion-Trip standard - 4100
  • Trip height, in. 13 (shear bolt protected above)
  • Type Parabolic with or without wear shins, straight with wear shins

Standards, Option 2

  • Trip force, lb. Spring-Reset ripper standard - 3200-4700
  • Trip height, in. 22
  • Type Parabolic with or without wear shins

Standards, Option 3

  • Trip force, lb. Shear-bolt standard - 9000
  • Trip height, in. ---
  • Type Parabolic or straight with wear shins

Ground Engaging Components

  • Type 2.75, 5, 7, 10 in. Extreme LaserRips
  • Coverboards ---
  • Wear shin optional

Mulching Disk Components

  • Description One set in front of the standards, one set behind the standards
  • Depth control ---
  • Maximum depth, in. 6
  • Type of standard C-spring
  • Base equipment blades 24 X .256-in. front and rear solid (optional cut-out front blades)
  • Blade spacing, in. 11
  • Front frame angle 18 degrees fixed
  • Rear frame angle 16 or 14 degrees
  • Spools 5.5-in. steel fabricated with 1.25-in. square gang bolt
  • Bearings Dura-Flex
  • Scraper Combination

Rear Conditioner

  • Description NA
  • Adjustments NA
  • Type of standard NA
  • Base equipment blades NA
  • Bearings NA

Tires

  • Type 12.5L-15 FI D LT (4) centerframe (11L-15 for rigid); 11L-15 FI D LR (2) wing frame

Wheels

  • Type Tandem Walk-Over wheels

Rear Hitch

  • Type 6500 lb. maximum GVW and 1000 lb. maximum tongue weight
Call Us
Need Help? Call Us at:
800-593-3373
Contact Us
Or Email us here:
Contact Us
Ag-Power Locations
Ag-Power
Locations
DMC Firewall is a Joomla Security extension!