John Deere

Welcome to Ag-Power | Premier John Deere Equipment and STIHL Dealership.

2700 Mulch Ripper

The 2700 Mulch Ripper meets the needs of those customers who want to cut and size residue, till and mix the soil, break up compaction, and leave a level or a ridged soil profile.

Features and Benefits

  • Variety of working and transport widths available
  • Percentages of residue cover remaining when using 2700 Combination Ripper
  • Walk-Over™ tandem wheels provide support and stability for smoother operation in the field
  • Narrow transport option available
  • Rear disk conditioner levels the soil profile
  • Rigid single-tube hitch provides greater turning clearance and shorter turning radius
  • Increase down pressure on mulching disk frames
  • Mulching disks are hydraulically adjustable
  • Hose identification kit

SPECS

  • MANUFACTURER  John Deere
  • MODEL  2700 

Tool

  • Configuration Disk - Disk - Ripper - Conditioner 
  • Option 1 5-standard on 30-in. spacing 
  • Option 2 7-standard on 24-in. spacing 
  • Option 3 7-standard on 30-in. spacing 
  • Option 4 7-standard on 30-in. spacing (low transport) 
  • Option 5 9-standard on 24-in. spacing 
  • Option 6 9-standard on 24-in. spacing (low transport) 
  • Option 7 --- 
  • Option 8 --- 
  • Option 9 --- 
  • Option 10 --- 
  • Option 11 ---  
  • Option 12 --- 
  • Option 13 --- 
  • Option 14 --- 
  • Option 15 --- 
  • Option 16 --- 
  • Option 17 --- 

Working Width

  • Option 1 12-ft. 6-in. 
  • Option 2 14-ft. 
  • Option 3 17-ft. 6-in. 
  • Option 4 17-ft. 6-in. 
  • Option 5 18-ft. 
  • Option 6 18-ft. 
  • Option 7 --- 
  • Option 8 --- 
  • Option 9 --- 
  • Option 10 --- 
  • Option 11 --- 
  • Option 12 --- 
  • Option 13 --- 
  • Option 14 --- 
  • Option 15 --- 
  • Option 16 --- 
  • Option 17 --- 

Transport Width

  • Option 1 14-ft. 3-in.
  • Option 2 16-ft. 6-in.
  • Option 3 19-ft. 
  • Option 4 16-ft. 3-in.
  • Option 5 19-ft. 3-in.
  • Option 6 16-ft. 10-in.
  • Option 7 --- 
  • Option 8 --- 
  • Option 9 --- 
  • Option 10 --- 
  • Option 11 --- 
  • Option 12 --- 
  • Option 13 --- 
  • Option 14 --- 
  • Option 15 --- 
  • Option 16 --- 
  • Option 17 --- 

Depth

  • Maximum operating depth, in. 16 

Transport Clearance

  • Standard, in. 10 

Underframe Clearance

  • Maximum, in. 37.5 

Speed

  • Operating speed 5-6 

Horsepower

  • Horsepower required per standard 34-55 

Depth Control

  • Option 1 Single point crank 
  • Option 2 Electro-hydraulic TouchSet 

Hydraulics

  • Option 1 3 SCVs (lift, front disks, rear conditioner) at 2500 psi for optimum raise times 
  • Option 2 4 SCVs (lift, front disks, rear conditioner, and low transport fold) at 2500 psi for optimum raise times 

Hitch

  • Design Single tube 
  • Fore-aft adjustment Hitch turnbuckle 

Standards

  • Spacing, in. 24, 30 
  • Frame cross section --- 

Standards, Option 1

  • Trip force, lb. Cushion-Trip standard - 4100 
  • Trip height, in. 13 (shear bolt protected above) 
  • Type Parabolic with or without wear shins, straight with wear shins 

Standards, Option 2

  • Trip force, lb. Spring-Reset ripper standard - 3200-4700 
  • Trip height, in. 22 
  • Type Parabolic with or without wear shins 

Standards, Option 3

  • Trip force, lb. Shear-bolt standard - 9000 
  • Trip height, in. --- 
  • Type Parabolic or straight with wear shins 

Ground Engaging Components

  • Type 2.75, 5, 7, 10 in. Extreme LaserRips 
  • Coverboards 4, 6, 8-in. on parabolic standards (not recommended for 24-in. spacing) 
  • Wear shin --- 

Mulching Disk Components

  • Description 2 sets up front 
  • Depth control Hydraulically adjustable 
  • Maximum depth, in. 4 
  • Type of standard Rigid or C-spring 
  • Base equipment blades 22 X .256-in. front and rear solid spherical low concavity 
  • Blade spacing, in. 16.5 (effective) 
  • Front frame angle 18 degrees fixed 
  • Rear frame angle 16 degrees fixed 
  • Spools NA - individually mounted disks 
  • Bearings Maintenance free 
  • Scraper --- 

Rear Conditioner

  • Description conditioner 
  • Adjustments Depth control - hydraulically adjustable 
  • Type of standard C-standard, TruPosition standard 
  • Base equipment blades 18 X 0.134-in. front and rear spherical 
  • Bearings Maintenance free 

Tires

  • Type 11L-15 FI D LR (4), 12.5L-15FID/F (4) 

Wheels

  • Type Tandem Walk-Over wheels (7S30, 9S24 standard 12.5L-15; 5S30, 7S24 optional)
Call Us
Need Help? Call Us at:
800-593-3373
Contact Us
Or Email us here:
Contact Us
Ag-Power Locations
Ag-Power
Locations
Our website is protected by DMC Firewall!