John Deere

Welcome to Ag-Power | Premier John Deere Equipment and STIHL Dealership.

John Deere 630D Draper Header

The 630D has a true 30-ft cutting width and the unique draper-style crop cutting system delivers the high-capacity feeding required of the high-capacity STS Combines.

The 630D Draper Platforms increase combine productivity in small-grain and rice harvests:

The draper belt system ensures smooth, uniform feeding of crop to the feed drum and the combine feederhouse.

Ideal for harvesting crops where additional cutting platform productivity is desired.


  • MODEL 630D


  • Type Straight line knife drive system
  • Length, ft. (m) 30.5-ft (9.30m)
  • Knife drive Dual Knife base; single optional (for combine use only)
  • Knife speed 520 cycles/min
  • Cutterbar tilt Base hydraulic (9 degrees tilt max)

Pickup Reel

  • Number of slats 6 bat poly base; 6 bat steel optional
  • Fingers Nylon base; steel optional
  • Diameter, in. (mm) 42-in (1067mm)
  • Height control Hydraulic
  • Speed control Hydraulic
  • Reel lift, in. (mm) 13.0-in (330mm) Cylinder stroke; 15.4-in (391.5mm) Total Range
  • Reel fore and aft, in. (mm) 14.1-in (359mm) Cylinder stroke; 24.4-in (620mm) Total Range
  • Reel resume Base
  • Reel reverse Base
  • Operating speeds, rpm 6-54 rpm
  • Operating speeds, rpm (54-in. reel) ---

Slat Reel

  • Number of slats ---
  • Diameter, in. (mm) ---
  • Height control ---
  • Speed control ---
  • Operating speeds, rpm ---

Draper Belts

  • Width, in. (mm) Side belts 40-in; Center belts 55-in; Center belt not included with SPW configuration
  • Clean height, in. (mm) 1-in (25.4mm)
  • Operating speed, ft./min. (m/min.) Side belts: Variable up to 735-ft/min (223m/min); Center belts: 695-ft/min (212m/min); Center belt not included with SPW configuration
  • Speed control Hydraulic from cab
  • Center belt reverse Base; Center belt not included with SPW configuration

Feed Drum

  • Diameter, in. (mm) 16-in (406mm); Feed drum not included with SPW configuration
  • Feed drum fingers Heavy duty round 5/8-in (16mm) diameter with breakaway notch and retainer
  • Number of fingers 18
  • Auger finger platform Dual Chevron, retracting
  • Finger reach, in. (mm) 6-in (195mm)
  • Drum/auger reverse Base
  • Operating speed, rpm 195 rpm
  • Center clean out door Base

Header Height Sensing

  • Type Electro-hydraulic base
  • Header height sensing on the ground Base
  • Header height sensing off the ground Base

Auxiliary Top Auger

  • Type Optional; hydraulic drive


  • Platform length, ft. (m) 32.9-ft (10.03m)
  • Overall operating depth, ft. (m) 8.2-ft (2.5m)
  • Transport width, field position, ft. (m) 32.5-ft (9.91m)
  • Transport width on wheel, less dividers, ft. (m) 8.9-ft (2.71m)
  • Transport length, hitch extended, ft. (m) 40.4-ft (12.31m)


  • Approximate weight (slat reel), lb. (kg) ---
  • Approximate weight (pickup reel), lb. (kg) 6855 lb (3109kg) Combine Only; 5532 lb (2509kg) SPW Only
  • Approximate weight (with transport) lb (kg) 7,245 lb (3286kg) Combine Only; 5922 lb (2686kg) SPW Only
  • Approximate weight (optional 54-in. reel) lb (kg)
Call Us
Need Help? Call Us at:
Contact Us
Or Email us here:
Contact Us
Ag-Power Locations
DMC Firewall is developed by Dean Marshall Consultancy Ltd