John Deere

Welcome to Ag-Power | Premier John Deere Equipment and STIHL Dealership.

John Deere 625D Draper Header

The 625D has a true 25-ft cutting width and the unique draper-style crop cutting system delivers the high-capacity feeding required of the high-capacity STS Combines.

The 625D Draper Platforms increase combine productivity in small-grain and rice harvests:

The draper belt system ensures smooth, uniform feeding of crop to the feed drum and the combine feederhouse.

Ideal for harvesting crops where additional cutting platform productivity is desired.

Specs

  • MANUFACTURER John Deere
  • MODEL 625D

Cutterbar

  • Type Straight line knife drive system
  • Length, ft. (m) 25.5-ft (7.77m)
  • Knife drive Base single; Optional Dual Knife (Combine use only); Base Dual Knife (SPW only or SPW/Combine combination use)
  • Knife speed 520 cycles/min (1040 strokes/min)
  • Cutterbar tilt Base Hydraulic (9 degrees tilt max)

Pickup Reel

  • Number of slats 6 bat poly base; 8 bat steel optional (for forage conditions)
  • Fingers Nylon (steel optional typically used in rice or forage conditions)
  • Diameter, in. (mm) 42-in (1067mm); 54-in (1371mm) for rice or forage conditions
  • Height control Hydraulic
  • Speed control Hydraulic
  • Reel lift, in. (mm) 13.0-in (330mm) Cylinder stroke; 15.4-in (391.5 mm) Total Range
  • Reel fore and aft, in. (mm) 14.1-in (359mm) Cylinder stroke; 24.4-in (620mm) Total Range
  • Reel resume Base
  • Reel reverse Base
  • Operating speeds, rpm 6-54 rpm
  • Operating speeds, rpm (54-in. reel) 5-44 rpm

Slat Reel

  • Number of slats ---
  • Diameter, in. (mm) ---
  • Height control ---
  • Speed control ---
  • Operating speeds, rpm ---

Draper Belts

  • Width, in. (mm) 24-oz rubber coated polyester with V-Guide tracking; Side belts 40-in (1016mm); Center belts 55-in (1397mm); Center belt not included with SPW configuration
  • Clean height, in. (mm) 1-in (25.4mm)
  • Operating speed, ft./min. (m/min.) Side belts: Variable up to 735-ft/min (223m/min); Center belts: 695-ft/min (212m/min); Center belt not included with SPW configuration
  • Speed control Hydraulic from cab
  • Center belt reverse Base; Center belt not included with SPW configuration

Feed Drum

  • Diameter, in. (mm) 16-in (406mm); Feed drum not included with SPW configuration
  • Feed drum fingers Steel heavy-duty round 5/8-in (16mm) diameter with breakaway notch and retainer
  • Number of fingers 18
  • Auger finger platform Dual Chevron, retracting
  • Finger reach, in. (mm) 6-in (152mm)
  • Drum/auger reverse Base
  • Operating speed, rpm 195 rpm
  • Center clean out door Base

Header Height Sensing

  • Type Electro-Hydraulic Base
  • Header height sensing on the ground Base
  • Header height sensing off the ground ---

Auxiliary Top Auger

  • Type Optional; hydraulic drive

Dimensions

  • Platform length, ft. (m) 27.9-ft (8.49m)
  • Overall operating depth, ft. (m) 7.9-ft (2.41m)
  • Transport width, field position, ft. (m) 26.5-ft (8.09m)
  • Transport width on wheel, less dividers, ft. (m) ---
  • Transport length, hitch extended, ft. (m) ---

Weight

  • Approximate weight (slat reel), lb. (kg) ---
  • Approximate weight (pickup reel), lb. (kg) 6359 lb (2884kg) Combine Only; 5036 lb (2284kg) SPW Only
  • Approximate weight (with transport) lb (kg) ---
  • Approximate weight (optional 54-in. reel) lb (kg) 6556 lb (2974kg) Combine Only; 5234 lb (2374kg) SPW Only
Call Us
Need Help? Call Us at:
800-593-3373
Contact Us
Or Email us here:
Contact Us
Ag-Power Locations
Ag-Power
Locations
DMC Firewall is a Joomla Security extension!