Residential

Welcome to Ag-Power | Premier John Deere Equipment and STIHL Dealership.

John Deere X590 Riding Mower

The John Deere X590 Riding Mower with a 25-hp engine is available with a 48-in or 54-in deck. Learn more...

Features and Benefits

  • Engine Power - 25 hp 
  • Transmission Type - K72 hydrostatic  
  • Chassis - Welded heavy-duty  
  • Steering - Power, two-wheel steer

SPECS

  • MANUFACTURER John Deere
  • MODEL X590

ENGINE

  • Power - 25.5 hp 19 kW  
  • Displacement - 44.3 cu in. 726 cc  
  • Manufacturer/model - FS730 EFI  
  • Type - Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter  
  • Cylinders - V-twin, cast-iron liners  
  • Governor - Constant-speed electronic  
  • Choke/speed control - No choke required  
  • Cooling method - Air  
  • Air cleaner - Dry, replaceable with foam precleaner  
  • Oil drain - No tools  

FUEL SYSTEM

  • Type - Gasoline  
  • Fuel delivery - Open-loop electronic fuel injection (EFI)  
  • Fuel gauge - Gauge on dash  
  • Fuel tank location - Rear  
  • Fuel fill opening - On left fender, 3 in. 7.6 cm  
  • Fuel tank capacity - 4.4 U.S. gal. 16.7 L  

ELECTRICAL SYSTEM

  • Battery - 12 V 500 CCA  
  • Charging system - Flywheel alternator, regulated, 15 amp  
  • Hourmeter - Yes  
  • Headlights - Two standard, incandescent, 27 W  
  • Taillights or reflector - Reflectors  
  • Backup lights - No  
  • Rear work lights - No  
  • 12-V outlet - Yes  

TRANSAXLE

  • Type - K72 hydrostatic integrated with transaxle  
  • Control - Twin Touch™ pedals  
  • Cruise control - Yes, button on dash  
  • Oil cooler - Fins and fan on transaxle  
  • Oil filter - Yes, replaceable  
  • Differential lock - Standard  
  • Forward speed - 0-7.2 mph 0-11.6 km/h  
  • Reverse speed - 0-5.2 mph 0-8.4 km/h  
  • Brakes - Internal wet disc  

CHASSIS

  • Frame - Welded heavy-duty  
  • Primer/paint - E-coat/powder  
  • Weight bracket - Standard front and rear each holds up to four Quik-Tatch weights, 42 lb 19 kg  
  • Receiver hitch - No  
  • Front axle - Cast iron front axle, front wheel ball bearings  
  • Spindle bushings - Metal, replaceable  
  • Front tires - 16x6.5-8 turf  
  • Rear tires - 24x12-12 turf  
  • Hood material Molded-in color hood material reduces sound, will not rust or dent  
  • Fender deck material - Stamped steel  
  • Floor mats - Sure-grip rubber  
  • Storage - Yes, under seat and covered toolbox  
  • Service interval decal - Yes  
  • Fender handles/grips - Handles  
  • Cup holder - Yes  
  • Equipment mounting - Yes, heavy duty  

STEERING

  • Type - Power, hydraulic  
  • All-wheel steer - Not available on this model  
  • Steering wheel - 14 in. 35.6 cm  
  • Tilt steering wheel - Standard, five position  
  • Turning radius - 22 in. 55.9 cm  
  • Uncut circle radius - 48A - 27 in. 68.6 cm 54A - 24 in. 61 cm  

SEAT

  • Type - High-back  
  • Seat back height - 21 in. 53.3 cm  
  • Armrests - Optional  
  • Fore-aft adjustment - While seated, slide rail, 14-position, 7 in. 17.8 cm  
  • Seat suspension - Tilt, two coil springs, three-position no-tools adjustment for operator weight  

LIFT SYSTEM

  • Type - Hydraulic  
  • Hydraulic outlets - No  
  • Mower cut height - 13 positions, 1-4 in. 2.5-10.2 cm  
  • Cut height increments - 0.25 in. 0.64 cm  
  • Preset cut height - Yes  

MOWER DECK

  • Type - Side discharge  
  • Cutting width - 48, 54 in. 122, 137 cm  
  • Construction - Stamped steel deck shell  
  • Mower deck material - 10 gauge 0.135 in. 3.4 mm  
  • Mower wash port - Yes  
  • Mower drive system - Electric power take-off (PTO) clutch, in-line belt  
  • Mower wheels - Four  
  • Mower wheel adjustment - Seven-position, spring-loaded pin  
  • Mower level adjustment - Exact Adjust ports and onboard deck-leveling gauge  

MOWER ATTACHABILITY

  • Type - Roll under tractor  
  • Front draft arms - Attached with spring pins at two points  
  • Rear draft arms - Quick-pull pins  
  • Mower wheels rotate - Yes, 90 degrees for easy mower removal  
  • Drive system - Dual belt  

SAFETY

  • Meets ANSI standard - Yes  
  • Meets OPEI standard - Yes  
  • Backup protection - Reverse Implement Option (RIO)  
  • Safety video - Yes  

BUYERS NOTES

  • Heavy-duty garden tractor transaxle 
  • Convenient power steering and hydraulic lift 
  • Built-in front and rear weight brackets  

OPTIONAL EQUIPMENT 

  • Mowers - 48X option, 54X option  
  • Rear bagger - 7, 14, 19 bu 247, 493, 670 L  
  • Powered material collection - Power Flow™ blower  
  • Mulching system - Yes, MulchControl™  
  • Front thatcher - 38, 46, 54 in. 96.5, 116.8, 137.2 cm  
  • Front blade 48 in. 121.9 cm 
  • Snow blower - Two-stage, 47 in. 119.4 cm  
  • Rotary tiller - Mechanical, 30 in. 76.2 cm Hydraulic, 42 in. 106.7 cm  
  • Sleeve hitch - Yes, implements include box scraper, rear blade, plow, disk, and cultivator  
  • Plow, moldboard - Yes  
  • Box scraper - Yes  
  • Cultivator - Yes  
  • Rear blade - Yes  
  • Sprayer - Tow-behind, 15, 25, 45 U.S. gal. 56.8, 94.6, 170.3 L Mounted, 25 U.S. gal. 94.6 L  
  • Spreader 125, 175 lb 57.7, 79.4 kg Mounted, 125 lb 57.7 kg  
  • Front bumper - Standard front bumper/weight bracket  
  • Brush guard - Yes  
  • Weather protection - Weather enclosure  
  • Sun canopy - Yes  
  • Bucket holder - Yes, double bucket  
  • Grass striping - Lawn striping kit  
  • Tractor shovel - 40 in. 101.6 cm  
  • Tow-behind tools - 19  

DIMENSIONS

  • Height - 52.25 in. 132.7 cm  
  • Overall length - 79 in. 201 cm  
  • Wheelbase - 51.2 in. 130 cm  
  • Width with mower - 48A, 62.5 in. 159 cm 54A, 68.4 in. 174 cm  
  • Width with mower (deflector raised for storage) - 48A, 53.6 in. 136 cm 54A, 59.4 in. 151 cm  
  • Width without mower - 41 in. 104.1 cm  
  • Weight - 48A Mower, no fuel, 797 lb 362 kg 54A Mower, no fuel, 805 lb 365 kg  
Call Us
Need Help? Call Us at:
800-593-3373
Contact Us
Or Email us here:
Contact Us
Ag-Power Locations
Ag-Power
Locations
DMC Firewall is a Joomla Security extension!