Welcome to Ag-Power | Premier John Deere Equipment and STIHL Dealership.

John Deere Z960M ZTrak 31-hp

The John Deere Z960M ZTrak has a 31-hp engine and is available with a 60-in, 60-in MOD and a 72-in deck. Learn more...

Features and Benefits

  • Horsepower 31.0 HP* (23.1-kW)
  • Fuel Options Gasoline
  • Deck Sizes 60, 60 MOD, 72-in. (152, 183-cm)
  • 7-Iron™ PRO Mowing Deck
  • Mulch On Demand™ Available

SPECS

  • MANUFACTURER John Deere
  • MODEL Z960M

ENGINE

  • Model no. - FX921V  
  • Horsepower (gross) - At 3600 rpm 31.0 hp 23.1 kW  
  • Displacement - 61.0 cu in. 999 cc  
  • Cylinders - Two  
  • Crankcase capacity - With filter 2.0 U.S. qt 1.9 L  
  • Oil filter - Full flow, replaceable  
  • Lubrication - Full pressure  
  • Cooling - Air  
  • Air cleaner - Heavy-duty canister type with safety element 
  • Pre-cleaner - Yes  

FUEL SYSTEM

  • Fuel type - Gasoline  
  • Fuel consumption - Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr  
  • Fuel tank capacity - 11.5 U.S. gal. 43.5 L  
  • Fuel tank switch/shut-off valve - Yes  

ELECTRICAL SYSTEM

  • Charge system - 20 amp  
  • Battery voltage - 12 V  
  • Cold cranking amp - 300 amp  
  • Hour meter - Standard, digital  
  • Operator presence starting system - Brake-N-Go (hand)  

DRIVETRAIN

  • Hydraulic pumps - Tuff Torq® heavy-duty integrated piston pump  
  • Wheel motors - Tuff Torq heavy-duty integrated piston wheel motor  

TRAVEL SPEED

  • Forward - 0-10 mph 16.1 km/h  
  • Reverse - 0-4.5 mph 0-7.2 km/h  
  • Speed and direction control - Twin levers  
  • Hydraulic capacity - 5.9 U.S. qt 5.6 L  
  • Filter - Internal, replaceable  
  • Hydraulic oil cooler  

TIRES

  • Drive tires - 24x12-12  
  • Load rating - 4 PR  

BRAKES

  • Dynamic braking - Twin levers  
  • Park brake - Internal wet disk integrated in the transmission  
  • Park brake actuation - Hand brake  

PTO 

  • Type - Electro-magnetic 225 lb-ft 305 Nm  
  • Drive - V-belt  

MOWER DECKS

  • Available widths - 60, 72 in. 152, 183 cm  
  • Deck construction - One-piece stamped steel w/reinforcements  
  • Deck thickness - 7 gauge 0.179 in. 4.6 mm  
  • Discharge - Side, MOD  
  • Height-of-cut range - 1.0-5.5 in. 2.54-14 cm 
  • Increments - 0.25 in. 0.64 cm  
  • Cutting width - 60, 72 in. 152, 183 cm  

BLADES

  • Length - Varies by deck size  
  • Thickness - 0.25 in. 0.64 cm  
  • Tip speed - Approximately 18,000 fpm 5486 m/min  
  • Number - Three  

WHEELS

  • Caster wheel type - Semi-Pneumatic Front  
  • Caster wheel size - 13x6.5-6  
  • Front anti-scalp rollers - RH, center, LH  
  • Rear anti-scalp rollers - Optional  

DIMENSIONS

  • Length - 84 in. 213 cm  
  • Width - With chute down 74, 86 in. 188, 218 cm  
  • Height - With ROPS up 73 in. 185 cm 
  • With ROPS down - 47 in. 119 cm  
  • Weight - 1252 to 1340 lb 
Call Us
Need Help? Call Us at:
800-593-3373
Contact Us
Or Email us here:
Contact Us
Ag-Power Locations
Ag-Power
Locations
Our website is protected by DMC Firewall!