John Deere Z730M
ZTrak™ Zero Turn Mower
- 24-hp (17.9 kW)* FS series engine
- 54- or 60-in. High-capacity PRO mower deck with welded deck reinforcements
- 22.5-in. seat with adjustable armrests, springs and ComfortGlide™ suspension
- Cut height adjustment dial adjusts mower in ¼-in. increments from 1.5 - 5 inches
Features
Key engine features:
- 24 hp (17.9 kW) provides plenty of power.
- Large 44.3-cu in. (726-cc) displacement provides excellent torque.
- V-twin, 90-degree cylinder design allows for easy starts, excellent power and performance, and smooth operation.
- Engine model is FS730V.
- Many quality features are included.
- Cast-iron cylinder liners provide a long-wearing surface for longer engine life.
- Overhead V-valves allow the engine to breathe easily for excellent power and fuel economy.
- Automatic compression release provides easy starting.
- Internally vented carburetor maintains proper fuel mixture and minimizes emissions.
- Fuel shutoff solenoid stops excess fuel from entering the exhaust system and causing after bang upon shut down.
- A rotating metal grass chopper screen helps keep the engine fins clean by filtering out debris and reducing the size of material that gets through so it will pass harmlessly past the engine fins.
- The guard provides protection from the rotating fan.
- Full-pressure lubrication system provides plenty of oil to the engines moving parts to ensure reliable operation and long life:
- No-tools oil drain is convenient to use.
- A flexible drain tube can be placed above a drain pan to eliminate oil spills.
- Replaceable oil filter keeps the oil cleaner for a longer engine life and extends the time between oil changes.
- Integrated cleanout ports allow for checking and cleaning the engine cooling fins.
- Heavy-duty, multi-stage air filter system thoroughly cleans the engine intake air.
- Electronic ignition contributes to fast starts.
- A rear engine guard protects the engine and provides additional vehicle strength and integrity.
- A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer.
- 20-amp capacity
- Regulated to keep the battery at a full charge without risk of overcharging
8-gal. (30.3-L) fuel capacity for extended mowing times
The large-capacity fuel tank is easy to fill, and a convenient fuel level gauge is provided:
- Holds 8-gal. (30.3-L) of fuel to reduce time needed for refills
- Easy to see how much fuel is in the tank by viewing the sight gauge when approaching from the front of the machine
- Large, 3.5-in. (8.9-cm) fuel fill diameter for easy filling and minimum chance of spills
- Fuel fill location low for easy filling, within easy reach of the operator
John Deere recommends the use of fuel stabilizer in gasoline. See Fuel-Protect for gasoline engines (8 oz [237 mL]) for more information.
Each Z700 Series ZTrak™ Mower is equipped with either a 48-in. (122-cm), 54-in. (137-cm), or 60-in. (152-cm) HC PRO Mower Deck.
Mower/vehicle compatibility
High-capacity (HC) mower deck | ZTrak model | |||||
Z720E | Z735E | Z730M | Z735M | Z740R | Z740R with Tweel® tire technology | |
48-in. (122-cm) High-capacity PRO | X | X | X | X* | ||
54-in. (137-cm) High-capacity PRO | X | X | X | X | X* | |
60-in. (152-cm) High-capacity PRO | X | X | X | X | X | X* |
*Not compatible with material collection system (MCS)
Deep deck design
The mower deck has a deep-deck design:
- Constructed from heavy, 9-gauge, 0.15-in. (3.8-mm) steel.
- Minimizes the number of welds required
- Has a smooth underside for reduced material buildup
- Deep-deck design delivers excellent airflow, so large volumes of material can be processed quickly and efficiently.
- A wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
- A durable, plastic deflector spreads grass clippings evenly across the lawn, is hinged, and can be raised to minimize the storage space required.
- 1-in. (25.4-mm) cold-forged spindles are heat-treated for strength and are supported by ball bearings.
- Standard front rollers and two double-captured wheels provide a more even mowing job and reduce the chance of scalping.
- Adjustable for different mowing heights
- The front edge is raised above the blade plane to allow for even cutting of tall grass.
- Blade overlap is greater than many conventional decks for a clean cut.
- The mower can side-discharge, mulch, or collect material, except a Z740R equipped with Tweel tires is not compatible with a material collection system.
- Deck leveling and rake angle adjustment is provided at all four mower mounting points.
Reinforced leading edge
Steel reinforcing bars are welded to the front edge and trim side of the mower deck:
- Strengthens the deck to reduce chance of damage from obstructions
- Increased material thickness for longer life of the deck
Superior durability is designed in
The deck has deep, strong spindle pockets to keep the blades aligned, even after years of tough operation:
- Ribs formed in the deck shell add strength where it is needed.
- The aluminum spindle housing has 8-in. (20-cm) base for extra strength.
Flip-up spindle covers make cleaning the spindle area convenient.
Wheels and rollers
Dual-captured front and side anti-scalp wheels:
- Give a more even mowing job and reduce the chance of scalping
- Adjustable for different mowing heights
Step weldment
A permanent step weldment is located at the left front corner of the mower deck:
- Encourages proper entry to the operator station
- Provides a good gripping surface for the operator’s foot
Optional MulchControl™ attachment
The MulchControl attachment makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material.
Advantages of mulching grass clippings include:
- A beautiful looking lawn
- Grass clippings not blown onto the operator, driveways, or flower beds
- Less fertilizer use
- Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The left mower blade area is completely enclosed and optimized for mulching and will mulch even when the mower is in the side-discharge mode.
- Baffles around the center and right blades are optimized for mulching when the discharge baffle is closed.
- The attachment also includes mulching blades.
MulchControl handle is used to control baffle
The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle:
- The operator is required to get off the machine in order to engage or disengage mulch mode.
- MulchControl is well suited to the following mowing situations:
- Operators who usually mulch, but side-discharge when grass gets too long
- Operators who usually side discharge, but would like to be able to close the chute to control clippings
- Operators who always mulch a main lawn, but often side discharge secondary lawns
- Operators who bag clippings, but want to go farther before emptying bags
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side-discharge or bagging when needed.
MulchControl limitations
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn clean-up is desired
Compatibility
MulchControl is a field-installed attachment and compatible with the 48-in. (122-cm), 54-in. (137-cm), and 60-in. (152-cm) HC PRO Mower Decks available for the Z700 Series ZTrak Mowers.
Optional 6.5-bu (229-L) ZTrak Z700 Series MCS
The 6.5-bu (230-L) rear bagger efficiently collects material from a 48-, 54-, or 60-in. (122-, 137-, or 152-cm) Mower Deck:
- Hopper, attachment bar/bumper, Power Flow™ blower, and chute components are ordered separately to make a complete MCS.
- A weight bracket and four 18-lb (8.2-kg) weights are included for installation on the front of the vehicle to help counterbalance the weight of the hopper. For proper ballast with complete MCS:
- Four weights are required on a ZTrak Z700 Series equipped with a 48-in. (122-cm) Mower Deck.
- Three weights are required on a ZTrak Z700 Series equipped with a 54-in. (137-cm) Mower Deck.
- Two weights are required on a ZTrak Z700 Series equipped with a 60-in. (152-cm) Mower Deck.
The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:
- Two durable bags give a generous, 6.5-bu (230-L) capacity.
- The bags lift out for easy emptying.
- An efficient chute provides a smooth flow of material to reduce the chance of plugging.
- The chute and Power Flow blower must be ordered separately.
- Standard mower blades are used for bagging.
- The air exhaust duct directs air from the hopper back and toward the ground for clean operation.
- Convenient latch makes opening and closing the hopper easy.
NOTE: Appropriate hopper, Power Flow blower, chute, and attachment bar are required and ordered separately.
Specifications
Capacity |
6.5 bu (230 L) |
Material: |
|
Hopper top |
High impact polypropylene |
Chute |
Polyethylene |
Blower housing |
Nylon |
Fan |
Ultra-high molecular weight (UHMW) polyethylene |
Bags |
Polyester |
Filling |
Directly into bags for emptying on ground or in trailer or into plastic liners |
Fan diameter |
13 in. (33 cm) |
Fan width |
2.75 in. (7 cm) |
Number of fan blades |
Four |
NOTE: MulchControl attachments and MCS components are not included in base equipment for a Z700 Series ZTrak machine and must be ordered separately.
Tweel is a trademark of Compagnie Générale des Etablissements Michelin SCA.
The operator station is designed to provide superior comfort for the operator:
- Adjustable foot platform
- Ample legroom for comfortable operation
- Adjustable seat position, armrests, and suspension to suit the operator
- Can be dialed–in for operator height and weight
- Adjustable motion-control levers
- Upper and lower positioning combined with forward and rearward tilt offers 18 positions
- Large, padded areas on the control levers allow a choice of operator hand positions
- Upper and lower positioning combined with forward and rearward tilt offers 18 positions
Adjustable foot platform
The patent-pending, adjustable three-position toe board allows any operator to quickly adjust the footrest position for greatest comfort.
- Easily and without tools, each operator can adjust the location of the footrest area to the most suitable position.
- Adjustment range of 2 in. (5.1 cm)
- Large operator platform allows a wide range of foot positions.
- An attractive floor mat is optional on E and M Series.
Adjustable seat
A deluxe comfort seat with ComfortGlide suspension, fore-aft seat adjustment, and two adjustable suspension springs offers superior ride comfort:
- High-back, 22.5-in. (57.1-cm) seat with adjustable armrests and 3-in. (7.6-cm) fore-aft adjustment
The ComfortGlide suspension is an additional system that generates a controlled fore and aft movement of the seat when experiencing undulations in uneven terrain:
- It dramatically reduces horizontal vibrations, prevents jarring, and makes a big improvement to operator ride comfort.
- The feel of the ride is as if the operator is floating over the ground.
- It allows front-to-rear movement, up to 1-in. (2.5-cm) forward and 1-in. (2.5-cm) rearward, to be absorbed.
- One seat control lever has three positions.
- Slide seat fore/aft up to 3 in. (7.6 cm)
- Engages fore/aft isolator function to allow movement of up to 1 in. (2.5 cm)
- Disengages fore/aft isolator function to lock seat in position
Two steel springs under the seat absorb shocks when traveling over rougher areas to provide a smoother ride:
- Fore/aft spring positions – rearward for heavier operators who need more support and forward for lighter operators
- 4-in. (10.2-cm) long steel springs have plenty of travel to give a smooth ride
The seat is securely held down, but is easy to raise when necessary:
- A spring-loaded latch locks seat down when it is lowered.
- The seat is easy to release and raise to access adjustable seat springs on E Series and M Series Mowers.
Adjustable steering levers
Adjustable steering levers are shaped for operator comfort and ease of controlling vehicle speed and direction:
- The premium steering levers on M and R Series machines are painted green and have different bends for more hand positions.
- The levers offer 18 different positions for height and position to accommodate operator preference for hand placement and leg clearance.
Optional light-emitting diode (LED) work lights
Model year 2023 and newer R-Series Z700 ZTrak Mowers include standard LED work lights. The lights are integrated into the front of the foot platform and side fenders to protect them from damage and the elements. BUC11547 LED work lights are available as a field installed attachment to upgrade for E- and M- Series models. BUC10301 LED work light kit is for earlier model years that do not have provisions for integrated LED lights.
Cup holder and storage compartment
Operator convenience is provided with easy-to-reach and easy-to-use deluxe cup holder and storage areas:
- Cup holder includes room for a cup with a large handle.
- Covered storage under the battery access panel provides protection for important items.
The ComfortGlide seat suspension comes with two adjustable springs and no-tools, fore-aft seat adjustment that can be used by the operator while seated:
- High-back, 22.5-in. (57.1-cm) seat with adjustable armrests and 3-in. (7.6-cm) fore-aft adjustment
- The ComfortGlide seat suspension is an additional system that allows a controlled fore and aft movement of the seat when experiencing undulations in uneven terrain.
- Dramatically reduces horizontal vibrations and reduces jarring
- Feel of ride is as if the operator is floating over the ground
- Makes a big improvement to operator ride comfort
- Allows front to rear movement, 1-in. (2.5-cm) forward and 1-in. (2.5-cm) rearward, to be absorbed
- One lever with three positions
- Slide seat fore/aft up to 3 in. (7.6 cm)
- Engage isolator function to allow movement up to 1 in. (2.5 cm) fore and aft
- Disengage isolator function to lock seat in position
Armrests can be raised for easier entry and exit from the machine.
Infinite height adjustment of the armrest can be made by an easy-to-use thumbscrew.
Two steel springs under the seat absorb shocks when traveling over rougher areas to provide a smoother ride.
- Fore/aft spring positions – rearward may be suitable for heavier operators and forward for lighter operators
- 4-in. (10.2-cm) long springs have plenty of travel to give a smooth ride
The seat is securely held down, but is easy to raise when necessary:
- A spring-loaded latch locks seat down when it is lowered.
- The seat is easy to release and raise to access adjustable seat springs.
An ergonomic design and professional grade components are suitable for a wide variety of operators and conditions:
- Comfortable operator station and convenient controls help optimize operator experience.
- Large operator platform allows a wide range of foot positions.
Adjustable features customize the mowing experience for each operator. One of these features is an adjustable foot platform.
Operator platform designed for adjustability and comfort
The patent-pending, adjustable, three-position toe board allows the operator to quickly adjust the footrest position for greatest comfort:
- Easily and without tools, each operator can adjust the location of the footrest area to the optimum position.
- Adjustment range of 2 in. (5.1 cm) in 1-in. (2.5-cm) increments is possible.
Short operators may be most comfortable with the platform in the rear position (as shown above), while tall operators may be more comfortable with the platform in the forward position. Or perhaps, the middle position provides just the right amount of leg room.
Foot pegs (standard on R Series, optional on E and M Series)
Patent-pending foot pegs (standard on R Series, optional on E and M Series) provide the operator with different foot placement options.
- Foot pegs can be adjusted into two different positions, horizontal or at an angle, to provide more variability for foot placement. The pegs also act as handles to remove and replace the foot platform.
4-year bumper-to-bumper warranty*
Exclusive, 4-year, single-source, bumper-to-bumper warranty is included for all John Deere Z700 Series ZTrak mowers. The warranty places John Deere at the forefront of the mowing industry. It is hassle free, with one company handling all the paperwork.
Z720E, Z735E |
4-year, 500-hour warranty |
Z730M, Z735M |
4-year, 750-hour warranty |
Z740R |
4-year, 1000-hour warranty |
Service interval decal
A convenient service decal gives basic maintenance information. It provides a quick reference for keeping recommended service up to date. It is located underneath the battery cover.
Quick response (QR) codes link to owner information web pages
To speed access to owner information web pages, a QR code is printed onto a product identification number (PIN) label located under the right steering lever. The owner information web pages that include links to:
- Safety and how-to videos
- Operator’s manuals
- Parts catalogs
- Maintenance reminder sheets
- Attachments
- Warranty statements
Flip-up foot platform for mower deck access
The professional-style steel foot platform is easy to remove without tools:
- Makes cleaning grass off the top of the mower deck easier
- Provides convenient access to the mower deck for service
Engine service
The engines are easy to service, including changing the oil and the oil filter and servicing the air filter:
- The engine oil check/fill tube is located at the top of the engine and easy to see and reach.
- No-tools oil drain is convenient to use. A flexible oil drain tube is included to conveniently drain oil into a pan, thus eliminating oil spills.
Engine air filters are at the top of the engine for easy service:
- Z720E, Z735E, Z730M, and Z735M engines have knobs to remove the filer cover.
- The Z740R has a heavy-duty, multi-stage canister air filter system, which uses a round primary and secondary filter that are easily accessed with latches on the end cap.
Grease fittings
Only three grease fittings require service:
Three to lubricate the mower-blade spindles, two easily accessed from the spindle covers, and the third by removing the foot platform.
Battery accessibility
The battery is protected from debris, dust, and moisture:
- It is easy to access under the panel on the left-hand side of the machine.
- Held in place by an easy-to-remove thumbscrew
- Powerful 340 cold cranking amp (CCA) battery provides dependable starts.
Mower deck serviceability
A patent-pending deck-leveling system provides easy adjustment at all four mower mounting points:
- Loosen the nut (B) slightly with a 15-mm wrench.
- Using the open end of a 16-mm wrench on the hex fastener (A), raise or lower the deck as needed so the height of the rear blade tip is 3 to 6 mm (1/8 to 1/4 in.) higher than the front blade tip.
- Tick marks on bracket (C) are provided to aid in observing movement.
- When the deck is at the height needed, tighten the nut (B).
Serviceability is designed into the mower deck:
- Easy access is provided by the removable operator foot platform.
- Flat-top design minimizes places for debris to collect.
- Spring-loaded, flip-up belt guards make removing debris easy.
- A provision is provided for a standard, 3/8-in. (9.5-mm) ratchet wrench to be used for releasing belt tension when removing the drive belt.
Transmission bypass (tow valves)
Tow-valve controls are provided for each transmission:
- Controls are located at the rear of the machine and are easy to access.
- Tow valves allow moving the machine in its neutral position when the engine is not running.
- Simply, loosen the knob, push towards the front of the machine, and tighten the knob back. When finished moving the machine, return the rods to the operating position.
Built-in tie-down locations
Four tie-down locations are provided for convenience and safety when trailering the machine.
Operator digital video disc (DVD)
An operation and safety DVD is provided with each machine. Please consult the operator’s manual for other safety and operating procedures.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
Control panel
The operator control panel is conveniently located to the right of the operator for easy use.
The following controls are found on the right-hand console:
- Key switch
- Hour meter
- Ignition switch
- Power take-off (PTO) control
- Engine speed control
- Engine choke control
- Mower cut-height dial
- Mower transport position lock
- Space for optional light kit switch
Adjustable steering levers
Motion control levers are shaped and located for operator comfort and ease of control.
Premium control levers on the Z730M, Z735M, and Z740R have a unique shape and size for more comfortable operation.
The motion-control levers can be adjusted to two different height settings and nine different fore-aft settings:
- Combined height and fore/aft positions gives 18 adjustments
- Increased operator comfort with more leg room and more hand positions
- Adjustable for most precise control of the machine
Tracking adjustment
On-board tracking adjustment can be made by the operator from the operator seat.
- A 13-mm socket wrench is required.
Parking brake integrated with motion-control levers for extra convenience
A patent-pending automatic parking brake system is designed into the steering control levers:
- The mechanical parking brake is operated by the steering control levers.
- The parking brake is engaged when the steering control levers are moved outward, and it is disengaged when the steering control levers are moved inward to the operating position.
- An audible click lets the operator know the brake has fully engaged or disengaged.
The internal parking brake rotor and puck are continually lubricated and cooled for dependable operation and long life.
Mower deck lift/cut-height adjustment
Mower deck cutting height adjusts from 1.5 in. (3.8 cm) to 5 in. (12.7 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance:
- The foot-lift pedal is used to raise the mower deck for setting cut height or locking in the raised or transport position.
- A lift-assist spring is provided to optimize the effort it takes to raise the mower deck.
- To adjust cut height, simply push down on the foot-lift pedal, adjust the dial, and release the foot-lift pedal to lower the deck to the chosen height.
- Use the foot-lift pedal to lock the deck in transport mode. Simply depress the pedal all the way and the deck will lock into transport mode.
- To unlock and lower the deck, push down on the foot-lift pedal, pull up on the transport unlock lever and release the foot-lift pedal to lower the deck to the chosen height.
Safety interlock system
Safety interlocks help prevent operating in an unsafe way:
- The parking brake must be engaged for the engine to crank.
- Parking brake is set when motion-control levers are in the outward position.
- The operator presence system requires the operator to be in the seat to operate the PTO.
- The key switch interlock prevents bypass starting.
- If the operator leaves the seat when the PTO is engaged, controls are in the operating position, or the parking brake is not set, the engine will shut down.
- The seat interlock switch disengages the mower when the operator leaves the seat.
- The engine will stall if the operator leaves the seat without the motion-control levers in the outward position and the parking brake set.
Formed and welded steel frame
A strong, welded steel frame provides solid, reliable support for the machine components and operator:
- Heavy-duty 3- x 2-in. (76.2- x 51-mm) frame tubing for durability
- Rear frame provides solid support and protection for the engine
Large, smooth-riding front caster wheels
Large front caster wheels provide a smooth ride and level cut:
- A large surface area helps to provide a smooth ride for the operator.
- Pneumatic tires for the smoothest ride (Z720E, Z735E, Z730M, Z735M, Z740R)
- Semi-pneumatic tires for extra reliability and durability (Z740R with Tweel® tire technology)
- Better performance on slopes
- Caster wheels turn easily on two maintenance-free sealed ball bearings for both the spindles and the wheel axles.
- Long, trouble-free life
- Designed to give smooth turns without damage to the turf
Large rear drive wheels for a smooth ride and level cut
Rear tires have high-quality tread and optimum size for superior traction and smooth ride:
- Tire width is optimized for mower deck size.
- 9.5 in. (24 cm) for 48-in. (122-cm) mowers (E, M, R Series)
- 10.5 in. (26.7 cm) for 54-in. (137-cm) and 60-in. (152-cm) mowers (E, M Series)
- 12 in. (30.5 cm) for 54-in. (137-cm) and 60-in. (152-cm) mowers (Z740R)
- Tread pattern is optimized for excellent traction and minimum turf damage.
- Special wheel design gives an enhanced appearance to the machine.
- Optional Michelin® X® Tweel Turf airless radial tire technology on the Z740R provides extra reliability and ride quality.
Heavy-duty step weldment
A heavy-duty, permanent step weldment is located at the left front corner of the mower deck:
- Encourages proper entry to the operator station
- Provides a good gripping surface for the operator’s foot
Michelin, X, and Tweel are trademarks of Compagnie Générale des Etablissements Michelin SCA.
Dual transmissions efficiently power the ZTrak™ mower forward and reverse and give steering capability:
- The unitized hydrostatic drive features a hydraulic pump combined with a commercial-grade, heavy-duty wheel motor into a single unit.
- One pump and one motor transmission to drive each wheel provides several benefits:
- Exceptional cooling in high-load conditions
- Easy-to-check fluid level and refill with hydraulic oil
- Opens up access under the seat
- Transmissions are set low in the vehicle for excellent hillside stability.
- Heavy-duty components stand up to the higher loads from the larger tires and greater weight of Z700 Series ZTrak Mowers.
- Low maintenance, unitized transmissions are sealed and have no hose connections to leak hydraulic fluid.
- Four-bolt hubs provide a reliable and convenient wheel-mounting system.
The hydrostatic drive features two Hydro-Gear ZT-3200™ transmissions for superior performance and durability:
- Unitized hydraulic pumps and commercial-grade, heavy-duty wheel motors combined into a single unit
- Speeds up to 9.5 mph (15.3 km/h)
- Pump displacement: 0.61 cu in. (10 cc) per revolution
- Motor displacement: 0.97 cu in. (16 cc) per revolution
- Durable 1.125-in. (2.86-cm) axles for heavy loads
- Standard shock valves for added system protection
- Standard charge pump for increased performance
- External oil filter for easier maintenance
Expansion tanks and tow valve controls
Transmission fluid expansion tanks are provided for each transmission. The yellow filler cap is easy to find and identify.
Tow-valve controls are provided for each transmission:
- Controls are located on the transmissions near the expansion tanks where they are easy to reach and use.
- Tow valves allow moving the machine in its neutral position when the engine is not running.
- Simply pull up on the rods and secure them into the slot. When finished moving the machine, return the rods to the operating position.
Hydro-Gear and ZT-3200 are trademarks of Hydro-Gear Limited Partnership AF Holding Company, a Delaware Corporation and Danfoss Power Solutions (US) Company, a Delaware Corporation
The spacious operator station has been designed for comfort, visibility, and ease of use:
- Getting on and off is easy with the flat operator platform.
- Convenient-to-use controls are located close to the operator.
- Operator controls are color coded and designed for easy identification and operation.
The ROPS and seat belt work in conjunction to provide a protective zone around the operator:
- It reduces the operator’s risk of being crushed under the vehicle should it overturn.
- In most situations, the ROPS limits the overturn to little more than 90 degrees.
- When used with a seatbelt, the ROPS is very effective in preventing deaths and serious injuries.
- Use of the seat belt is recommended when operating with ROPS in the upright position.
Foldable ROPS and retractable seat belt are standard equipment:
- Position adjustment pins provide a good grip and make changing the angle of the ROPS easier.
- Easy-fold ROPS includes a built-in isolator.
- The ROPS can be pinned halfway down to accommodate machines equipped with a material collection system.
- Door height of most garages will accommodate the machine with ROPS in the fully raised position.
- Easy-fold ROPS improves the ability to store the ZTrak in structures with a lower door opening.
- Easy-fold ROPS improves the ability to store the ZTrak in structures with a lower door opening.
ROPS position | Z720E and Z735E machine height |
Z730M and Z735M machine height |
Z740R machine height |
Full height | 71.7 in. (182.2 cm) | 71.7 in. (182.2 cm) | 72.1 in. (183.2 cm) |
Down position | 47.4 in. (120.3 cm) | 49.7 in. (126.2 cm) | 51 in. (129.5 cm) |
Specs & Compare
Key Specs | Z730M Current Model |
Engine power | 24 hp 17.9 kW |
Engine model number | FS730V |
Forward speed | 0-9.5 mph 0-15.3 km/h |
Front caster tires | 13x6.5-6 |
Drive tires | 23X10.5-12 (54- and 60-in. decks) |
Seat back height | High back with adjustable armrests, 22.5 in. 57.1 cm |
Width of cut | 54 in. 137 cm 60 in. 152 cm |
Mulching system | Optional MulchControl™ attachment |
Warranty | 4 year/750 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Battery | |
Charger | |
Engine | |
Power | 24 hp 17.9 kW |
Model number | FS730V |
Displacement | 44.3 cu in. 726 cc |
Cylinders | V-twin |
Lubrication | Full pressure with replaceable filter, capacity, 2 U.S. qt 1.9 L |
Type | Overhead valve |
Battery | 12 V 340 CCA |
Choke/speed control | Separate control levers |
Cooling method | Air |
Fuel tank capacity | 8 U.S. gal. 30.2 L |
Fuel gauge | Fuel level sight line |
Drive train | |
Dual hydros | Hydro-gear ZT3200 with 1-in. (2.54-cm) axles |
Hydraulic pumps | |
Wheel motors | |
Battery | |
Charger | |
Transmission | |
Travel speed | |
Forward speed | 0-9.5 mph 0-15.3 km/h |
Reverse speed | 0-4 mph 0-6.4 km/h |
Speed and direction control | Twin premium levers |
Control adjustment | 2-height/18 positions |
Chassis | |
Frame | Heavy-duty frame tubing |
Primer/paint | E-coat/powder |
Front caster tires | 13x6.5-6 |
Front caster bearings | Sealed ball bearings |
Drive tires | 23X10.5-12 (54- and 60-in. decks) |
Hour meter | Yes |
Service interval decal | Yes |
Storage compartment | Yes |
Cup holder | Yes |
Maximum towing capacity | |
Seat | |
Seat back height | High back with adjustable armrests, 22.5 in. 57.1 cm |
Fore-aft adjustment | While seated, +/- 2 in. 5.08 cm |
Seat suspension | Two four-position springs with ComfortGlide™ fore/aft suspension |
Lift system | |
Type | Spring assisted foot lift |
Mower cut height | 1.5-5 in. 3.8-12.7 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | Yes |
Mower deck | |
Width of cut | 54 in. 137 cm 60 in. 152 cm |
Type | High-capacity (HC) PRO side discharge |
Mower deck material | 9 gauge 0.150 in. 3.8 mm |
Mower drive system | V-belt |
PTO | |
Type | Electric, 125 lb-ft 169 Nm |
Drive | V-belt |
Dimensions | |
Wheelbase | 49.9 in. 126.7 cm |
Overall length | 82 in. 208.4 cm |
Width without mower | 50.6 in. 128.4 cm |
Width with mower | 54 HC, 68.2 in. 173.2 cm 60 HC, 73.3 in. 186.1 cm |
Width with mower (deflector raised for storage) | 54 HC, 59.4 in. 151 cm 60 HC, 64.8 in. 164.5 cm |
Height | ROPS up - 71.1 in. 182.2 cm ROPS down - 49.7 in. 126.2 cm |
Weight | With mower and fuel, 54 HC, 965 lb 437 kg With mower and fuel, 60 HC, 995 lb 451 kg |
Operation | |
Rollover protective structure (ROPS) | Yes |
Slope operating limit | 15 degrees; 10 degrees with MCS |
Operator presence system | Yes |
Park brake interlock | Yes |
Operator video | Yes |
Buyer's notes | |
Note 1 | Flip-up and adjustable foot platform for easy service access |
Note 2 | |
Note 3 | |
Warranty | 4 year/750 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional attachments | |
Mulching system | Optional MulchControl attachment |
Rubber floor mat | Optional |
Sun shade | |
Mounted sprayer | |
Storage cover | |
Light kit | Optional LED work and beacon lights |
Material collection system | 54 HC PRO and 60 HC PRO Power Flow™ rear bagger, 6.5 bu 229.1 L |
Additional information | |
Manufacturing location | |
Date collected | 1-Sept-2022 |
Offers & Discounts
Reviews
Location: Danville, KY
Length of Ownership: 1week
Usage: Weekly
John received my z730m today from my local dealer fully serviced, topped off with fuel and ready to mow. I mowed about 4 acres and the mower performance was flawless. I have a mix of terrain that includes trees, hills, man-made obstacles, and pond, to name a few. We just purchased this property and the grass was at least three weeks grown. The 730 easily cut the 8-inch plus grass and in some spots more like 10-12. The seat, springs, and glide of the seat made the roughest spots seem like golf course greens. The mower has plenty of power, and I really enjoy the braking mechanism. I was able to throw on the brake, disengage the PTO and remove sticks/rocks/etc with ease. I don’t have the mulch kit yet but the clippings were almost unnoticeable. Aside from my own novice abilities and not having a good mowing pattern for my property, I used only about 1 1/2 gallons for ~ hours of mowing. Bottom line up front, this is a quality John Deere machine…best mower I’ve ever owned,
Location: GA
Length of Ownership: 1week
Usage: Weekly
Just got this mower on 7/7/22 and right from the start it has been great. Nice comfortable ride. Very easy to use operate with all the controls right beside you. Beefy and durable frame work on this machine. Much better than my previous John Deere Z225. It tackled 4 foot high grass that was as thick as and dense as ever with ease.
Location: Southeastern Ohio
Length of Ownership: 1yearOrLonger
Usage: Weekly
I have had this mower for a year now and Iam very pleased with it. Had a Z625 and moved up to Z730M. Big difference. The seat is great for areas of slightly rough ground it won’t beat you up. The cut is very nice
Location: Barto, PA
Length of Ownership: 1yearOrLonger
Usage: Weekly
I had this mower and out about 120 hours onto it. It cut, and striped absolutely amazing and I had zero issues. Easy to do services on, the only thing I wish Deere would do is make tweels compatible(not the same size).
Location: Bremond
Length of Ownership: 1yearOrLonger
Usage: Weekly
I bought this mower last April so I cut almost the whole season with it last year a couldn’t be happier. Leaves a great cut every time no matter how thick the grass is or how fast you go. Plenty of power and I was also impressed on how long the blades have lasted. I have real sandy soil and of a lot of Bahaia grass which are the two worst mowing conditions. Would definitely buy again.
Location: Florida
Length of Ownership: 1week
Usage: Weekly
Just got it and so easy to use. Super awesome mower
Location: Dalton Georgia
Length of Ownership: 3months
Usage: Weekly
I bought it in July and it's been an awesome zero turn
Location: Lawrence, KS
Length of Ownership: 1month
Usage: Weekly
Smooth ride, turns great, reasonably quiet. Fuel usage is much lower than expected.
Location: Nc
Length of Ownership: 3months
Usage: Weekly
I have owned many zero turn mowers. Some good some good some not so good. I would give the 730M a grade of b+. Will get stuck if you drive in the dew. Easily avoided. But if you buy a new one be very cautious of that thing they call warranty. It is about real as a unicorn.. I am not here on a scholarship, but I am no dummy either.