Agriculture

Welcome to Ag-Power | Premier John Deere Equipment and STIHL Dealership.

John Deere 328 Square Baler

The John Deere 328 Square Baler produces a 14-in.-tall by 18-in.-wide bale up to 50-in. long.

Features and Benefits

  • The John Deere 328 Square Baler produces a 14-in.-tall by 18-in.-wide bale up to 50-in. long. It also features a dependable twine knotter system and meets the demands of the price-conscious customer.
  • Full-width feeding pickup
  • Adjustable hay compressor
  • Deep-flighted auger feeding
  • Accurate knotters
  • Hydraulic bale tension available
  • Uniform bales

SPECS

  • MANUFACTURER John Deere
  • MODEL 328

Bale Size

  • Height x Width, in. (cm) 14x18 (36x46)
  • Length, in. (cm) 12 to 50 (30.5 to 127)
  • Maximum Volume, cu. ft. (m3) ---
  • Dry Bale Weight, lb. (kg) N/A

Pickup

  • Pickup Width, in. (cm) 74 (187.9)
  • Tooth Bars/Teeth 4 bars, 104 teeth
  • Lift Control Crank (hydraulic opt.)
  • Pickup Diameter, in. (cm) 19.5 (49.5)

Auger

  • Diameter, in. (cm) 16 (41)
  • Length, in. (cm) 61 (154.9)

Plunger

  • Strokes/Minute 80
  • Stroke Length, in. (cm) 30 (76.2)

Typing Mechanism

  • No. of Knotters 2
  • Twine Capacity 4
  • Twine Type Plastic or sisal
  • Knot Strength (Minimum Required) ---
  • Central Lube System Optional
  • Wire Twisters ---
  • Wire Ball Capacity N/A

Baler Dimensions

  • Length w/short tongue, in. (cm) ---
  • Length w/long tongue, in. (cm) 227 (576.5)
  • Width, ft.-in. (cm) 108 (274.3)
  • Height, ft.-in. (cm) 67 (170.2)
  • Weight, lb. (kg) Empty 2685 (1208)

Tractor Requirements

  • PTO Speed, rpm 540
  • Minimum PTO, hp 35

Drive Mechanism

  • Driveline Equal angle 3 joint category 4
  • Optional Driveline NA
  • Pickup Belt
  • Plunger Gear and shaft
  • Knotters Gear and shaft
  • Feeder Forks Gear and shaft
  • Size of Flywheel, lb. (kg) 227 (103)

Drive Train Protection

  • PTO Slip clutch & overrunning clutch
  • Gearbox Disk slip clutch & shear bolt
  • Pickup Belt slip
  • Needles Shear bolt/plunger head stop
  • Knotters Shear bolt

Tires

  • RH Standard tire size 26x12.0-12, 4 ply
  • RH Optional tire size ---
  • LH Standard tire size 11L-14, 6 ply
  • LH Optional tire size ---
  • Gauge Wheels 1 optional
  • Pickup Gauge Wheels Tires Size 16.5x6.50-8

Lights

  • Work None
  • Transport lights None

Density Control System

  • Adjustable Bale Density Mechanical crank
  • Adjustable Hydraulic Bale Density Optional
  • Bale Counter ---

Bale Ejector

  • Available Optional

Bale Chute

  • Short chute Optional
  • Long chute Optional
  • Side bale drop chute Optional
  • Wagon hitch Optional
Call Us
Need Help? Call Us at:
800-593-3373
Contact Us
Or Email us here:
Contact Us
Ag-Power Locations
Ag-Power
Locations
Our website is protected by DMC Firewall!