New Products John Deere John Deere Tractors 1000-9000 Series Tractor Series 1000 John Deere 1026R (25-hp) Utility Tractor
The 1 Series 1026R Tractor offers the value-minded customer a high-quality, versatile and cost-effective tractor from John Deere. Assembled in the U.S.A. at John Deere’s Augusta, Georgia factory, this tractor is designed for the customer who desires the power and productivity of a compact utility tractor, yet is value oriented and price conscious.
The 1026R Tractor has a 25.2 gross horsepower* three-cylinder engine. Hydrostatic transmission and 4-wheel drive (4WD) are in the base equipment.
Customers can easily extend the productivity hours of the tractor with the standard side fender lights that will allow them to work in low light conditions. A wider wheel base and overall width gives the tractor great stability for those uneven terrains. The 1026R Tractor meets the needs of customers who place a high priority on comfort, versatility, productivity, and reliability.
Specs
MANUFACTURER John Deere
MODEL 1026R (2011)
Engine
Manufacturer Yanmar 3TNV76
Engine HP (kW) - gross 25.2 (18.5) per ISO 97/68/EC
PTO HP (kW) - Gear transmission ---
PTO HP (kW) - Hydrostatic transmission 18 (13.4) per SAE
Rated engine speed, rpm 3200
Type Diesel
Operating range 1360-3370
Aspiration Natural
Cylinders/Displacement, cu. in. (liters) 3 / 68 (1.115)
Cylinder Liners Cast-In-Block
Bore and Stroke, mm (in.) 76x82 (2.99x3.23)
Compression Ratio 23.5:1
Lubrication Pressurized
Cooling System Water pump
Air Cleaner Dry type with safety element
Engine Shutoff Key switch
Engine Torque @ rated speed, ft./lb. (N/m) 40.7 (55.2)
Fuel Tank Cap., US Gal. (L) (Open; Cab) 5.6 (21.2)
Electrical
Type 12V
Battery Size (CCA) 500
Alternator (12 volt, amp) 40
Starter Size, hp (kW) 1.6 (1.2)
Fuel System
Type Diesel
Injection Pump Type Indirect Injection
U.S. gal./hr (L/hr) @ 100% load* 1.4 (5.3)
*Fuel consumption rate should be used for comparison purposes only. ---
Transmission
Std. Transmission; Forward/Reverse Hydrostatic - 2 range
Opt. Transmission; Forward/Reverse ---
Left-Hand Reverser No
On-The-Go Shifting (Yes/No/Partial) N/A
Direction Reverser; Forward/Reverse No; Twin Touch Pedals
Final Drive Spur gear
Brakes Wet disk (left hand pedal)
Steering Power
Clutch; Wet/Dry N/A
Clutch Disk Diameter, in. (mm) wet clutch ---
Drawbar Tongue Weight Capacity, lb. (kg) ---
Axle Capacity (in operation) ---
Front, lb. (kg) 1253 (568)
Rear, lb. (kg) 2078 (942)
Creeper No
Hydraulics
Type Open Center
Pump Rated Output, gpm (L/min.) 6.3 (24)
Steering 2.8 (10.8)
Implement 3.5 (13.2)
Pump Type Gear
Maximum Operating Pressure (PSI) 2000
Draft Control Type Select Control
Remote Control Valves Available 2
3-Point Hitch
Type Limited Cat. 1
Lift Capacity (24-in. behind link arms), lb. (kg) 681 (309)
Lift Capacity @ lift link ends, lb. (kg) ---
Power Take-Off (PTO)
Standard Rear @ 540; Mid @ 2100
Optional ---
Control Independent
Clutch Wet disk
Brake (for Mid and Rear PTO) Wet disk
Fluid Capacities
Fuel Tank, gal. (l) 5.6 (21.2)
Cooling system (includes coolant bottle), qt. (l) 2.9 (2.7)
Crankcase with filter, qt. (l) 3.9 (3.7)
Transmission and Hydraulic System, gal. (l) gear ---
Transmission and Hydraulic System, gal. (l) hydrostatic 3.25 (12.3)
Front Axle Gearcase (MFWD axle), gal. (l) .625 (2.5)
Final Drive
Type Spur Gear
Engage On-the-Go Rear Differential Lock Yes
Operator Station
Rollover Protective Structure OSHA, SAE, ASAE, EEC
Rigid - Foldable - Telescopic Foldable
Platform - Flat/Straddle One-piece semi flat
Gear Shift Location - Console/Floor Right Hand Side
Cab
Compliance ---
Visibility ---
Air Conditioning, Temperature Differential ---
Doors ---
Platform - Flat/Straddle ---
dB(A) Rating ---
Seat Suspension System ---
2WD Dimensions
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab ---
MFWD Dimensions
Wheelbase, in. (mm) 57.1 (1450)
Front Tread Range, in. (mm) 36.1 (918)
Front Axle Clearance, in. (mm) 7.7 (195)
Turning Radius w/Brakes, ft. (m) ---
Turning Radius w/o Brakes, ft. (m) 7.4 (2.25)
Limited Slip Differential ---
Unballasted Operating Weight, lb. (kg) ---
Approx. Ship Wgt, lb. (kg) Open; Cab 1444 (655)
Standard Tires
2WD ---
Front ---
Rear ---
MFWD ---
Front 18X8.5-10 R4
Rear 26X12-12 R4
Miscellaneous
Underhood Muffler Yes
Joystick SCV Control Yes
Inboard Planetary No
Axle Type Flanged
Brakes - Type and Control Wet Disk
Please log in to write a review.
