For parts, sales or service at any of Ag-Power's 17 locations, call.
Features and Benefits
The John Deere Z930R ZTrak is made for customers who seek the ultimate in productivity and functionality. The Z930R mower features a durable 7-Iron™ PRO decks as well as a commercial grade engine and available with a 54-in, 54-in MOD, 60-in deck.
MANUFACTURER John Deere
Model No. - FX801V
Horsepower (gross) - 25.5 HP @ 3600 RPM(1, 2)
Displacement - 852 cc
Cylinders - Two
Crankcase Capacity - 2.0 U.S. quart with filter
Oil Filter - Full flow, replaceable
Lubrication - Full pressure
Cooling - Air
Air Cleaner - Heavy-duty canister type with safety element
Pre-Cleaner - Yes
Fuel Type - Gas
Fuel Consumption - 1.1 U.S. gph to 1.9 U.S. gph under normal conditions, load, operation, and dependent on loads and operating conditions
Fuel Tank Capacity - 11.5 U.S. gallons
Fuel Tank Switch/Shut Off Valve - Yes
Charge System - 20 amp
Battery Voltage - 12 Volt
Cold Cranking Amp - 300
Hour Meter - Standard, digital
Operator Presence Starting System - Brake-N-Go (foot)
Hydraulic Pumps - Tuff Torq heavy-duty integrated piston pump
Wheel Motors - Tuff Torq heavy-duty integrated piston wheel motor
Forward - 0 - 12 mph
Reverse - 4.5 mph
Speed and Direction Control - Twin levelrs
Hydraulic Capacity - 5.9 U.S. qt
Filter - Internal, replaceable
Dynamic Braking - Twin levers
Park Brake - Internal wet disk integrated in the transmission
Park Brake Actuation - Foot Brake
Type - Electro-magnetic (225 lb. ft.)
Drive - V-belt
Available Widths/Type - 54 in., 54 in MOD, 60 in.
Deck construction - One-piece stamped steel w/reinforcements
Deck thickness - 7 ga. (0.177 in.)
Height-of-Cut Range - 1.0 in. to 5.5 in.
Increments - 0.25 in.
Thickness - 0.25 in.
Tip Speed - Approximately 18,000 fpm
Number - Three
Wheels and Tires
Drive (Rear) Tires - 24x12-12
Load Rating - 4 PR
Caster Wheel Type - Semi-pneumatic flat-free
Caster Wheel Size - 13x6.5-6
Front Anti-Scalp Rollers - RH, center, LH
Rear Anti-Scalp Rollers - RH, LH, (MOD decks), RH, LH, Center (all other decks)
Length - 84 in.
Width - 68, 74 in. with chute down
Height - 73 in. with ROPS up, 47 in. with ROPS down
1 - @ 3600 RPM engine manufacturer certified gross power tested in accordance with SAE J1995
2 - Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information.