×
Quick Used Equipment Filter












used search tag
Total: $0.00
Go to Cart

John Deere 3035D

Compact Tractor


  • Standard 4wd for Maximum Traction
  • Heavy duty drive train with a gear drive transmission 8F/8R
  • On-board diagnostics including Service Advisor

Starting At:
$24,749.00


Features


Clean and simple operator station is comfortable and convenient
Clean and simple operator's station Clean and simple operator's station

An uncluttered design gives operators of all sizes plenty of room to be comfortable. Color-coded controls are located on either side of the operator.

  • Contoured, comfortable seat enhances operator comfort.
    • Seat position adjusts fore and aft
    • Seat flips forward for protection from the elements
  • Flat operator platform provides for easy entry to/exit from the tractor.
  • Folding Roll-Gard™ rollover protective structure (ROPS) and retractable seat belt increase operator safety.

 

Operator presence system:

  • If the operator leaves the seat when the forward/reverse and range lever are in gear, the engine shuts down.
  • If the operator leaves the seat when the power take-off (PTO) is engaged, the engine shuts down.
Left-side step
Left-side step for easy entry/exit Left-side step for easy entry/exit
  • The left-side step allows for easy access on and off the tractor.
  • Foot platform has a non-skid surface for sure footing.
Seat
Seat Seat

The thick, soft padding on this seat provides a smooth and comfortable ride.

  • Seat flips forward for protection from the elements.
  • Adjustable using the fore and aft lever located under the seat, the seat slides on ramped rails to provide comfortable access to all controls.
Instrumentation
Instrument panel Instrument panel

Easy-to-read instrument panel includes the following:

  • Tachometer
  • Low oil pressure indicator light
  • Battery discharge indicator light
  • PTO engagement indicator light
  • Signal/hazard lamp indicator lights
  • Multifunction liquid crystal display (LCD) display (hours, filter cleaning information, PTO speed, etc.)
  • Filter cleaning status indicator light
Fuel tank and gauge
Rear-mounted fuel tank and gauge Rear-mounted fuel tank and gauge

All 3D Series Tractors come standard with a fuel gauge that is easy to read from the operator's station to ensure operators do not run out of fuel. The fuel tank is also located on the rear of the tractor to allow for easy refill.

Safety

Operator presence switch (OPS) in seat:

  • OPS requires the operator to be in the seat to operate the transmission or PTO.
  • ROPS is designed to meet or exceed American Society of Agricultural and Biological Engineers (ASABE) safety standards.
  • Reflective ROPS strips for better tractor visibility.
  • Seat belts are in base equipment on all John Deere compact utility tractors.
  • Key switch interlock prevents bypass starting.
  • Visual PTO warning light on the instrument panel alerts the operator when the PTO is running.
  • Turn signal and flashing warning lights operate according to ASABE standards.
  • Slow-moving vehicle (SMV) sign is provided for road transport.
Park brake
Park brake Park brake
  • Instrument panel has an indicator light for the park brake.

Two-post Roll-Gard ROPS
Roll-Gard ROPS Roll-Gard ROPS

3D Series Tractors are equipped with Roll-Gard ROPS. These folding ROPS meet the ASABE standards for compact utility tractors.

 

NOTE: The use of seat belts is recommended at all times when operating the 3D Series Tractor with the folding ROPS upright.

 

An optional canopy is available to help protect the operator from the elements.

Optional two-spool rear selective control valve (SCV) for superior implement performance
Optional rear SCVs Optional rear SCVs

3D Series Tractors can be equipped with a field-installed rear hydraulic remote kit, providing two additional hydraulic spools on the back of the tractor. This kit can be field installed on a tractor with a loader or without a loader.

 

The functions are completely separate from the loader. These rear remotes can be hooked up to a wide variety of implements and attachments such as follows:

  • Hydraulically angled blade
  • Hydraulically controlled chute/spout on a 3-point hitch-mounted snow blower
  • Hydraulic scarifiers on a box blade
  • Many other hydraulic rear attachments

This versatile kit gives 3D Series Tractor operators the options they desire for putting their tractors into a wide range of tasks.

 

The first spool is equipped with a float position, giving the operator the ability to contour the landscape and improve the final grade with certain implements.

 

NOTE: Neither of the spools in this kit are equipped with a detent position; therefore, they should not be hooked up to anything with a motor, as the valve was not designed to be run open. The kit is designed for momentary, on-demand hydraulic flow such as moving a cylinder.

 

The approximate installation time is 1 hour to 1.5 hours.

Optional iMatch™ Quick-Hitch feature allows for easy implement hookup
iMatch Quick-Hitch (LVB25976) iMatch Quick-Hitch (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
    • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
  • Lower bushing
    • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
Excellent serviceability reduces operational costs and improves productivity

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Easy access to most regular service points minimizes service time.

  • Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere-exclusive Service ADVISOR™ system.

  • Hydraulic oil service interval increased to 1200 hours when using Hy-Gard™ products. Hydraulic oil filter will need to be changed every 400 hours.

  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling.

Fuel tank on rear of the tractor Fuel tank on rear of the tractor
  • Four quarter turn fasteners allow operators to easily remove the engine side panels to access the engine compartment
Easy access to engine compartment Easy access to engine compartment
  • Daily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.

 

Daily service is quick and easy Daily service is quick and easy

All items in the daily service schedule can be performed without the use of tools:

  • Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed.

  • The engine can be easily accessed by simply raising the hood for more periodic maintenance checks.

NOTE: Always refer to the operator’s manual for complete maintenance and service recommendations.

Specs & Compare

ADD MODEL

Key Specs

3035D
Current Model
Engine power (gross)SAE J1995 rated power: 25.5 kW
34.2 hp
34.7 PS at 2800 rpm
Power take-off (PTO) power22.7 kW
30.4 hp
Steering hydraulics16.8 L/min
4.4 gpm
Implement hydraulics22.4 L/min
5.9 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms944 kg
2081.2 lb
Standard transmission; forward/reverse8F/8R synchromesh shuttle shift gear transmission
Cruise controlNo
Approximate shipping weight (open-station; cab)Open operator station (OOS): 1275 kg
2811 lb
Cab: Not applicable
Wheelbase1574 mm
62 in.

Engine

Family
ManufacturerYanmar®
Engine model3TNV88C-KJPT
Engine power (gross)SAE J1995 rated power: 25.5 kW
34.2 hp
34.7 PS at 2800 rpm
Power take-off (PTO) power22.7 kW
30.4 hp
Rated engine speed2800 rpm
Type
Injection pump typeHigh pressure common rail direct injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.64 L
3 / 100.2 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke88 x 90 mm
3.46 x 3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemLiquid
Air cleanerDual element
Engine torque at rated speed87 Nm
64.2 lb-ft
Fuel tank capacity36.7 L
9.7 U.S. gal.

Electrical

Battery size600 CCA
Alternator (12-V)55 amp
Starter size1.4 kW
1.9 hp

Fuel system

TypeHigh pressure common rail direct injection
Fuel consumption

Transmission

Standard transmission; forward/reverse8F/8R synchromesh shuttle shift gear transmission
Optional transmission; forward/reverse
Left-hand reverserYes
Transmission gear rangesFour gears and two ranges
Final driveSpur gear
BrakesWet disk
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
880 kg
1940 lb
Rear
1600 kg
3527 lb
CreeperNo
Cruise controlNo
Differential lockYes
Drawbar maximum vertical load

Hydraulics

TypeOpen center
Pump rated outputSteering
16.8 L/min
4.4 gpm
Implement
22.4 L/min
5.9 gpm
39.2 L/min
10.3 gpm
Pump typeSingle gear
Maximum operating pressure172 bar
2495 psi
Draft control sensingPosition control
Remote control valves availableUp to two (optional)

3-point hitch

TypeCategory 1
Lift capacity, 24-in. behind link arms944 kg
2081.2 lb

Power take-off (PTO)

StandardAt 2400 rpm: 540 rpm
Optional
ControlMechanical
ClutchTransmission
Brake (for mid and rear PTO)Wet disk
Engagement method

Fluid capacities

Crankcase with filter4.5 L
4.8 qt
Transmission and hydraulic system33 L
34.8 qt

Final drive

TypeSpur gear
Differential lock

Operator station

Rollover protective structureType
Foldable
ASABE S478
Platform - flat/straddleStraddle
Gear shift location - console/floorRight-hand side

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Height
Wheelbase1574 mm
62 in.
Front axle clearanceMinimum: 331 mm
13 in.
Maximum: 353 mm
13.9 in.
Turning radius with brakes1.63 m
5.3 ft
Turning radius without brakes
Limited slip differential
Approximate shipping weight (open-station; cab)OOS: 1275 kg
2811 lb
Cab: Not applicable

Tires

FrontR1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14
RearR1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5
Front tread range
Rear tread spacing

Miscellaneous

ToolboxYes
Tilt steering wheelNo
12-V OutletNo

Additional information

Offers & Discounts

No current offers.

Reviews



d9dl
Location: Georgia
Length of Ownership: 1week
Usage: Daily
response to 3 point hitch issue

There is a flow control for the 3 point hitch, located on the floor tucked away near the seat. You can adjust the flow everywhere from Zero movement to Violently over pressured. Hope this helps anyone with issues like previous review. This is the best toughest 3 Series tractor John Deere has come out with, for those whom are somewhat "Tractor Savey," stepping on a clutch is a very small price to pay for an all gear direct driven machine, that will By Far outlast anything HST. In the unlikely event something does break, it will be way easier and less expensive to fix. Got a lot of work to do? Old School heavy duty gears may be for you too! : )


Evan5507
Location: Austinville, va
Length of Ownership: 6months
Usage: Daily
Great tractor small farm

Bought this tractor to help maintain my small farm. Love the gear drive instead of hydrostatic for brush cutting and mowing. The driving setup reminds me of my old 2020 John Deere. Front loader works great and is very strong. I would definitely recommend this work horse for small farming or as a utility tractor for big jobs.

Pros:

  • gear drive for mowing
  • simple operation

rodman
Location: Central New york
Length of Ownership: 1month
Usage: Weekly
GREAT TRACTOR

I've had the fortune of owning this for a couple of weeks now! Lots a power & love that it's 4WD! I got it with Ag tires for a little more ground clearance & it's walked through the slop with ease. It surpasses my older smaller 4wd that I had years ago! And compliments my antique 2WD tractor well. It's a HD compact tractor, not a light, weak yard toy. The controls are in good placement, well marked, & all function properly. I couldn't be more pleased with my purchase & hope that I get many years of service.

Pros:

  • power
  • price
  • it"s green

blee
Location: Utah
Length of Ownership: 1month
Usage: Daily
Nice tractor exept for 3 point hitch

This tractor was just what I was looking for. Reasonable HP, Four wheel drive, nice open operator station, gear drive. I would have given it 4 stars except for the 3 point hitch behavior. If you raise the hitch slowly with an implement attached it goes up in steps and quite violently. It really jars the tractor. If the loader is resting on the ground it jars the tractor so hard that it will lift the bucket off the ground and slap it back down. It makes it really hard to precision adjust a box blade for grading. In fact I sent it back to the dealer to check the hitch and even they thought it was bad but finally came back and said it was normal. I have run the tractor now for about 4 hours with various implements. It pulls a 5 1/2' wide double row disk in hard ground just fine as long as it is in 4 wheel drive. You can shift from 2 wheel to 4 wheel drive on the fly but have to stop to shift back down. It has a foot pedal to lock the differential that you can hit with your heel if necessary. To start it you have to have the forward/reverse lever and the HI/low shift lever in neutral. You can leave the gear shift lever in gear. It does seem that the hi/low lever sticks in neutral a lot, you have to release any load on it by releasing and pushing in the clutch again. The 35 HP Yanmar engine runs real nice and starts fine when cold, I have started it at 22 degrees with no problem. It has a hand and a foot throttle. You do have to clutch for the gear shift, forward/reverse and Hi/low levers. You can shift the gear shift going up on the fly, but it seems to grind gears trying to shift down. First and second gears are very low. I found myself using 4th gear the most. I do not like having 8 reverse gears, if you let out the clutch when in 8th gear by accident watch out you may not like where you go. The chassis for this tractor says made in India, the loader is made in Mexico.

Pros:

  • nice engine
  • open operator station makes it real easy to get on
  • gear drive

Cons:
  • 3 point hitch jerks violently when raised slowly
  • 8 reverse gears

Videos